test banner



 
PääsivuPääsivu  CDLC.COCDLC.CO  HakuHaku  KäyttäjälistaKäyttäjälista  RekisteröidyRekisteröidy  Kirjaudu sisään  
Jaa | 
 

 Tanel: MR2 "scarface" GTS

Siirry alas 
KirjoittajaViesti
Tanel



Viestien lukumäärä : 11

ViestiAihe: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 2:56

Hello.
Came to NPS forum to sell my wheels, lurked around and noticed some Estonian rides here.
So i thought i'll post mine as well.

It's an JDM 92' MR2 GTS coupe. With 3sgte engine, lsd and some other goodies.
Bought it for my 20th birthday in January 2014.


Pictures from ad:





Got it like that


Front bumper was in 3 pieces, both light covers and 1 fender were f'ked up, lots of dents all over the car.
I really don't like to do things half-ass but fixed it all temporary to get it on streets and focused mostly on maintaince.

zip ties (that's where the scarface came)


Few new parts


First time on the streets


Now it's time for wheels.
I got these 17x8 5x120 fittipaldis laying around and 15/20mm 5x114,3 to 5x120 adapters also from my last mr2, so..



sooo high.



lowered the front end and, as soon as i got out of the garages, it started snowing again. Evil or Very Mad


In need for sound
old:

new stuff:


After new exhaust, rear lowering and camber all around a friend took some decent photos.


Newer interior pic's also
friend gave me gear knob from vaz 2101  :cheers:



Tried to shoot some photos by myself



Last photo before blowing the headgasket


Now its time for engine rebuild, headwork, lower compression, bigger turbo, custom manifolds, some standalone ecu, etc..
Besides the "go fast" mod's my winter plans are: coilovers, powerflex bushes, wider lip's for rears, maybe paint the wheels, some interior mod's, sound improvement, etc.. Maybe even some bodywork, Very Happy

Wheels 17x8 and offset is 32 on all 4
Current set up with spacers/adapters:
Front offset 17, tyres 205/40
Rear offset 4, tyres 215/40
Camber is maxed out on all corners with toyota's crash bolt's
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Tanel



Viestien lukumäärä : 11

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 2:57

I also want to show you some of my previous cars

My first car,E30 coupe, bought it for my 17th birthday and drove it every day since (until i crashed it).
Learned alot about driving and working on cars.
I could make a 2 page thread about it, but i try to make short.  Smile
It had some many diffferent looks i cant evan count, but here are few f them.

Got it like this.


i was obsessed about "ratstyle" and "hoodride"



Most of the time it looked like it came thru hell.

sometimes clean


by the end it had coilovers, 5x120 pattern, borbet A's, straight pipe, welded diff and some other 18yo dream mod's.

After that e30 i've had about 30 cars (no kiddin'), here's the one's i liked most.

318i


730i manual,


745 turbo, about 230hp from wheels

18's


525tdsA



Sierra i made for this years jaanipäeva (juhannuspäiva) trip



Mr2 n/a targa i had last summer. Corvette saladshooters 16x8,5/9,5 with 195/45 rubber

Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
niko
CDLC.CO Founder
avatar

Viestien lukumäärä : 1515
Paikkakunta : Turku

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 8:29

This is how project topics should be started. (y) MR2 is starting to look really good. Some wider lips for those fittipaldis gonna make a huge difference. Any thoughts which size lips you're going for? Waiting to see how your things get together with this MR2.

One of the best shots of your MR imo.


Also welcome to our forum. Here is few guys from Lowlifer Estonia like you've noticed. They actually have visited now two times in our Big Meet on summer.

_____ _____ _____ _____
From Stanceworks forum kirjoitti:
This community's name is Creme de la Creme because after I saw all of their cars i CREME'D myself...
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot http://www.cdlc.co/shop
Tanel



Viestien lukumäärä : 11

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 15:13

Thanks!
I would like atleast 10 inch wide rears but
unfortunately due to adapters and offset being 32, i cant go wide enough and i dont like pulled fenders.
My calculations show that i can fit 2,75inch lips max, that make wheels 9,75.
even then i'm gonna poke 7mm more than shooters did.
Current mr2 is alot lower and has few degrees more camber, so they would fit alot better.

I loved that fat ass Very Happy
I just have to put 15mm adapters to rear, besides 20+8mm i run at the moment, and then we'll see how wide i can really go.

I've even thinked about selling those fitti's and buying some other 5x114,3 3pieces to get rid of the adapters. Maybe someone here would like to trade?
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
m4kk3



Viestien lukumäärä : 233
Paikkakunta : Turku/Kaarina

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 16:16

Have you been thinking about drilling another PCD next to the old one? Thats one way to get rid of the adapters
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Tanel



Viestien lukumäärä : 11

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 15 Syys 2014 - 23:50

Back side of fittipaldis is'nt level, i could fill the holes by welding and make new ones but that much welding is'nt good for the wheels. And i dont really want to fuck up the originality.

My last chance is to make rear hubs from stud's to bolts and also extra 5x120pcd drill next to them
If the diameter is big enough to fit 5x120.
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Tanel



Viestien lukumäärä : 11

ViestiAihe: Vs: Tanel: MR2 "scarface" GTS   Ma 22 Syys 2014 - 1:59

Mr.Two is fat now  bounce
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
 
Tanel: MR2 "scarface" GTS
Takaisin alkuun 
Sivu 1 / 1
 Similar topics
-
» Tanel: MR2 "scarface" GTS

Oikeudet tällä foorumilla:Et voi vastata viesteihin tässä foorumissa
CDLC.CO Forum :: BUILD THREADS :: Builds & Introductions-
Siirry: