test banner



 
PääsivuPääsivu  CDLC.COCDLC.CO  HakuHaku  KäyttäjälistaKäyttäjälista  RekisteröidyRekisteröidy  Kirjaudu sisään  
Jaa | 
 

 Oxer: New Honda Civic - Jessica

Siirry alas 
KirjoittajaViesti
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Oxer: New Honda Civic - Jessica   Ke 17 Marras 2010 - 18:55

Hey guys, Ive been busy lately and havent had much time to get on here to say hi. For that I appologise.

Anyway, Recently I bought another civic, And I swapped over all the suspension and brakes from the blue one into this one..

When I bought her:




At the moment.








Soon to be lower with some new pieces. Let me know what you guys think! Razz  

Here are a couple of posts from the original build thread...

Oxer kirjoitti:

I bought this car for one reason in mind, To build it for the first StanceWorks meet in Melbourne, Australia on the 26/09/2010


Name:Jessica
Model: 1991 Honda civic
Colour: RED!
Bodykit: Garden edging Maybe??
Engine Type: D16 Twin cam non VTEC.
Engine Mods: Fully sick intake!
Power: ~80kw at the fly... Plus two people pushing, so 800hp atw.
Exhaust: Soon to be Straight Pipe!
Gearbox: Crunches second haha
Diff: Wide open.
Brakes: Type RRRRRRRRRRRRRRR
Suspension: BC coilovers
Wheels/Tyres: CCW Classics, Nankang skidders.
Interior: Grey. Will have Import EG5 seats though, and a Nardi wheel.
Other Mods: 5hp per sticker.
Stereo: Pumpin.
Build Period: 50 days from today!
Cost of car:$250.
Budget for the build: No more then $600
Spent: $607 BLOWN OUT! PHWOAH!

PICS:



Ill post up Parts as I get them, and Will most likely be building it in a weekend. Going to take the suspension from my EG and slap it in.. Mayaswell show off what Ive got rather then hide it for years and years!

List of things I still need:
- Brakes: Discs and pads all round Check!
- Rear calipers Check!
- Driveshafts: Maybe, Not sure if the Dseries shafts will fit into the dc2r hubs.. Done, Check!
- Piping for the exhaust Check!
- Pick up mates roller Check!
- Hoist to make life easier. Check!
- MOTIVATION!
List of things to do:
- Pull the sus out of the EG DONE
- Pick up rear calipers DONE
- Work out driveshaft situation DONE
- Pull the sus out of the EH DONE
- Fit new Sus in EH DONE
- Fit brakes DONE
- Bleed em! DONE
- Roll/Pull fenders DONE
- Modify Front upper arms for permacamber (No money for Adjustable arms right now Very Happy )
- Dial it in! DONE
- Stickers! DONE
- Detail if theres time:D Good enough.


Oxer kirjoitti:


SIZE="5"]So I went to my mates place Last night and picked up this..[/SIZE]




And today I Pulled the sus out of the Blue EG...





El cheapo discs and right rear sus..



Front coils... BC dont go that low... But Ill make them go that low.




Dirty dirty wheels... Im scared to clean them though Sad



The Import EG5 seats that will be going in...



And some spare wheels... 16x8 +28 equips.. Gonna refurb them and bring them out to 9"... They'll have drag slicks on em one day Wink




And thats all for now....

Oxer kirjoitti:

So back to this build.

Picked up the rear calipers last week, gave them a degrease..




And I also found some JDM flat sidemarkers I had stashed away..



So today, after sleeping 3 hours (late night crew meet), I got up and started doing the guards. First time Ive ever actually used a proper roller, I usually use a piece of pipe, so I didnt know what to expect. I knew the car wasnt Immaculate and has been resprayed at some stage so I prepared for the worst.

The front guards had bog (bondo) in them, and the left rear arch had a bit of rust in it, so they didnt come out as clean as I hoped. Being a budget build, I really dont care Wink

Before and after pics of each corner:

Front right (already damaged guard):




Rear right:



Front left:



Rear left:



Considering I tried to get as much as I could out of them, It came up not too bad. If it were a slight roll it would have been mickey mouse, but gotta pull to fit 9"s and 9.5"s with neg offsets :eyebrows

Only problem is, if they arent rolled enough, I have to resort to hammer, cause once all the type r suspension is on, the guard roller wont fit in there... Ill see how I go though.

Oxer kirjoitti:
So I had a pretty disheartening weekend... I wont go into mega details right now, but if something doesnt make sence, let me know. Ill clarify later.

Problems:

- Driveshafts wont work, Got quoted $450 per shaft to have custom ones that will work made.

- Rear calipers that were sold to me aren't Type R, so the rear could not be completed. Found this out only after I changed the control arms etc all over... so wnt to change the hubs out to put 4 stud back on to atleast be able to drive the car.. Spindles were different. So had to fabricate a spacer to lock the hubs on there. so saturday was a waste of a day.


Also found that the front ssr's on the legend are buckled due to the shit roads in our wonderful city, But they still hold air so Ill continue to destroy them Smile

Positives:

- Made the exhaust, Over shot it a touch, but Ill fix that later. :rofl.

- This.






There are no Type R rear calipers in the state so it seems, So the other option is to redrill the discks on it with the 4 stud, and run vtir rear brakes, but it is illegal to do and I probably wont find anyone to do it.

Who else would like to fuck my life with me?

Oxer kirjoitti:
I aint goin out like That!




I got to thinkin' "What the fuck is this?" Lettin' you know I take care of business


Viimeinen muokkaaja, Oxer pvm To 18 Marras 2010 - 20:09, muokattu 1 kertaa
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
CDLC.CO
CDLC.CO Founder


Viestien lukumäärä : 5471
Paikkakunta : Turku

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ke 17 Marras 2010 - 19:03

Very...very...very nice! Cool

In Finland, that civic its almost always raped and tuned to something terrible
You showed how to do it right.


Viimeinen muokkaaja, EeKi pvm Ke 17 Marras 2010 - 19:15, muokattu 1 kertaa
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Ino

avatar

Viestien lukumäärä : 263
Paikkakunta : Kirkkonummi

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ke 17 Marras 2010 - 19:10

Damn! Looking nice Razz
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ke 17 Marras 2010 - 19:22

EeKi kirjoitti:
Very...very...very nice! Cool

In Finland, that civic its almost always raped and tuned to something terrible
You showed how to do it right.

Haha thanks man, Just wait untill its lower and has the new pieces on it Smile

Got a factory lip for the front bar shipped from the US and a JDM rear spoiler that sits flush on the bootlid, not high like the one on there at the moment.

Should have some new pics in a couple of weeks :cheers:
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Antto-

avatar

Viestien lukumäärä : 655
Paikkakunta : Vantaa

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ke 17 Marras 2010 - 19:32

a GREAT looking car you have there! I love those wheels, they are spot on! Cool
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
john_gleasy
CDLC.CO Founder
avatar

Viestien lukumäärä : 4014
Paikkakunta : Turku

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   To 18 Marras 2010 - 2:00

WOW the ccw's are pure money ! Love the stance. Have any plans for the interior ?

_____ _____ _____ _____
CDLC ✖️ Community
Save the squares.
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Down



Viestien lukumäärä : 731
Paikkakunta : Kittilä

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   To 18 Marras 2010 - 14:18

Been drooling a LOT over this on Stanceworks!
You should totally post the full build, it was a good read!
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Alpha

avatar

Viestien lukumäärä : 521
Muut :


ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   To 18 Marras 2010 - 14:20

EeKi kirjoitti:
Very...very...very nice! Cool

In Finland, that civic its almost always raped and tuned to something terrible
You showed how to do it right.

+1
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   To 18 Marras 2010 - 19:34

john_gleasy kirjoitti:
WOW the ccw's are pure money ! Love the stance. Have any plans for the interior ?

Thanks, Not really much for the interior, It has import seats in it and the quick release wheel, Im thinking of some sort of crazy shift knob and maybe a hydraulic handbrake set up, but nothing for sure yet. If I could get a full ferio interiour (special model) then I would, but they are extremely hard to find complete. I missed out on one by a couple of day, I almost cried Laughing

Down kirjoitti:
Been drooling a LOT over this on Stanceworks!
You should totally post the full build, it was a good read!

Thanks dude! I will edit the first post with a bit more info then shall I?
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Down



Viestien lukumäärä : 731
Paikkakunta : Kittilä

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Pe 19 Marras 2010 - 0:33

Now that's better! Question time (since I didn't wanna be a 'tard and bump your SW-thread. Laughing ):
Did you re-drill the discs, or what?
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Kallunki

avatar

Viestien lukumäärä : 91
Paikkakunta : Haapavesi

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Pe 19 Marras 2010 - 15:18

This is pure sex, halfsmoked taillights would look awesome
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Pe 19 Marras 2010 - 15:48

Down kirjoitti:
Now that's better! Question time (since I didn't wanna be a 'tard and bump your SW-thread. Laughing ):
Did you re-drill the discs, or what?

Haha all good dude, I need to update it anyway! Yeah I ended up drilling the 4 stud discs, But I have since imported a set of rear calipers from japan (Actually type R this time Laughing ) So they will soon go on the car. Its going through a bit of work at the moment to pass the roadworth certificate required to register the vehicle, so its having quite a bit of work done mechanically, though nothing performance wise.

Kallunki kirjoitti:
This is pure sex, halfsmoked taillights would look awesome

I was actually thinking of cutting the back of the tail lights off and replacing them with LED boards, so that the whole lens is lit up with led's, rather then just one globe at a time.

Like this:

https://www.youtube.com/watch?v=E7Z6WqAP-SI

So that it looks stock from the outside Razz
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
apuapina

avatar

Viestien lukumäärä : 1134
Paikkakunta : Tku
Muut : pari fillarii.

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Pe 19 Marras 2010 - 16:57

Could be pretty nice. And atleast it would be kinda unique, haven't seen many ppl do that. Cool
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 20 Marras 2010 - 18:49


So a smallish update.. I ordered this just over a month ago.



A lip from a 'Reputable' company in the US....



Whats that I hear you say? "Ox, you dont own a firebird!" No shit. Its meant to be a jdm sir lip. I also ordered a block off plate for the antenna, But it was nowhere to be seen. Logically, I would have thought it would be in the pouch with the paperwork since its so small, but apparently us Aussies are on a different wavelength to you guys.



Heat might bring it back, But it will never sit properly... And the funniest part is the shipping cost more then the god damn lip. I sent an email to the company 2 days ago... Apparently emails take up to a week to get through to you guys.... It may get lost in the electronic mail sorting office, so Im guessing I will never hear back.

Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
J4TOG

avatar

Viestien lukumäärä : 3143
Paikkakunta : Paimio
Muut : Ja Vespa <3

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 20 Marras 2010 - 19:03

Just gotta love your civic Smile Keep on working!
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot http://www.j4tog.kuvat.fi/kuvat/
turhake

avatar

Viestien lukumäärä : 298
Paikkakunta : Tarvasjoki
Muut : DR-Z

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 20 Marras 2010 - 19:36

I bet the lip could be fixed with heat and burned fingers. Though new is always new, so don't let the company easy on this.
Civic looks great anyway, you mentioned about going even lower? lifting wheel arches or just tucking more? I have never been such a fan of 4-doors but this is an exception.
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Su 21 Marras 2010 - 16:05

turhake kirjoitti:
I bet the lip could be fixed with heat and burned fingers. Though new is always new, so don't let the company easy on this.
Civic looks great anyway, you mentioned about going even lower? lifting wheel arches or just tucking more? I have never been such a fan of 4-doors but this is an exception.

Yeah I still havent heard back from the company, I dont think I will either.

The rear sits just about where I want it to, But the front is too high for my liking. Going to try and bring it down another inch and tuck more tire. At the moment the coilovers are on their lowest setting, but I am going to try and drop the spring a bit to get that extra inch cause there is still thread on the housing.

In a month Ill be getting some stiffer springs, so with any luck I will be able to close up the remaining gap between the lip of the wheels and the guard Surprised
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
AndreasNystrom

avatar

Viestien lukumäärä : 11
Paikkakunta : Tammisaari

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ke 30 Maalis 2011 - 22:12

Really nice Civic you´ve got there mate! keep those nice pics coming to this forum! Smile ME like!
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot http://www.garaget.org/AndreasNystrom
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 18 Toukokuu 2013 - 13:53

Hey guys, I havent been on here in a long time, and I havent really done a lot to my old car, but I thought I should update you on where I am at.

This thread is pretty far behind the times. ill give a brief rundown to get it back up to date.

Early 2011:



Mid 2011

got tired of the ccws, did silly things to them.





Late 2011 I went to america, upon return my good frien Tom and his brother Toli had started to turbo charge the civic, when I returned, within 4 days it was all done and running.



within a few weeks of that, I put it on air.





Then drove it interstate a couple times





At the start of 2012 the head gasket let go, I pulled the motor with the intention of swaping it with a friend in a relatively short period of time. The car has been sitting ever since. Its back on coilovers and will be staying static. Several goodies have been ordered, as per usual there are big plans. I kind of need to get most of them done before the end of the year as I may not have a garage to work on it much longer.

Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 18 Toukokuu 2013 - 13:58

Here is a video shot recently, Going to start doing work and making this car better then ever.

https://vimeo.com/65608675


And some pics of the daily Smile




Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
allu_

avatar

Viestien lukumäärä : 883
Paikkakunta : Turku

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 18 Toukokuu 2013 - 14:06

Oh nice, that´s realy good looking! affraid
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
john_gleasy
CDLC.CO Founder
avatar

Viestien lukumäärä : 4014
Paikkakunta : Turku

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 18 Toukokuu 2013 - 16:37

I've always been a fan of your style Ox. That daily is just super!

_____ _____ _____ _____
CDLC ✖️ Community
Save the squares.
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
Oxer



Viestien lukumäärä : 33
Paikkakunta : Melbourne Australia

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 18 Toukokuu 2013 - 19:53

Thanks guys ❤
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot
AndreasNystrom

avatar

Viestien lukumäärä : 11
Paikkakunta : Tammisaari

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   Ti 25 Kesä 2013 - 20:35

looking sweet man!
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot http://www.garaget.org/AndreasNystrom
niko
CDLC.CO Founder
avatar

Viestien lukumäärä : 1513
Paikkakunta : Turku

ViestiAihe: Vs: Oxer: New Honda Civic - Jessica   La 13 Syys 2014 - 19:40

This topic has been moved. There's no longer a discrete section for international projects. We wanted to get all build/showroom topics into the same place to make this forum little more international.

_____ _____ _____ _____
From Stanceworks forum kirjoitti:
This community's name is Creme de la Creme because after I saw all of their cars i CREME'D myself...
Takaisin alkuun Siirry alas
Näytä käyttäjän tiedot http://www.cdlc.co/shop Linjoilla
 
Oxer: New Honda Civic - Jessica
Takaisin alkuun 
Sivu 1 / 1

Oikeudet tällä foorumilla:Et voi vastata viesteihin tässä foorumissa
CDLC.CO Forum :: BUILD THREADS :: Builds & Introductions-
Siirry: